I am pleased to finally share with you my finished circle top…
I can not believe how easy this top was to put together and how much fun I had doing it. After years and years of avoiding curves I am thrilled to be able to add a whole new list of quilts to my “must do” list.
In my original post about this quilt I talked about the two different templates I used to make the curved blocks. There were some of questions about the EZ circle template so I thought I would take the opportunity to talk briefly about that process a little more…
For the following example I made a 6 inch Drunkard Path block… so to start I cut out a 5 inch square of my circle fabric and a 6 1/2 inch square of my back ground fabric.
To cut the circle out I aligned my 5 inch square to the bottom line of the ruler marked “Fabric fold line” and to the middle arrows of the ruler.
I then ran my rotary cutter along the inside of the “8” finished circle” grove. If you want to make a complete square with this ruler you cut a 10 inch square of fabric and fold it in half length wise and width wise so you end up with a 5 inch square of folded material. You follow the above steps, making sure that the folded sides of the material align with the “fabric fold line” marks on the ruler.
You now have your inner curve… so onto your outer piece. For this piece I choose to cut a 6 1/2 inch square but you this ruler gives you some great creative choices here. If you want less background in your block you could go down to a 5 1/2 inch square or if you wanted more back ground you can increase your back ground square as you want.
You are aligning your background square as you did your inner circle square but this time you are cutting on the curve 1 inch less than your circle curve. For me this meant I cut on the 7″ finished circle line. Again if you want to make a circle using this ruler, make your background piece double the size (in this case my background piece would be 13 inches square) and fold your fabric before cutting.
For the blocks of my Acidic Curve quilt I cut a 9 inch curve and then had a 6 inch background block with a curve cut out using the 8″ mark on the ruler. This gave me a finished circle block of 11 inches to work with. Hopefully I have not confused you too much… but I can definitely recommend the EZ ruler. I am finding it is giving me great creative choices for the curved blocks I am making, though the biggest curve I can make with it is a 10 inch finished circle.